Chapter 2. Instrument Setup
46
DMS Go Operator’s Manual
2.3.3 Setting Security Functions
Follow the procedures in this section to adjust the display appearance. (The adjustments require access to the
CONFIG
submenu.)
2.3.3a Permitting a User to Access Specified Functions (CONFIG - LOCKOUT)
A supervisor might need other users to have access only to particular DMS Go functions. The DMS Go has two user levels: Expert and
Inspector. The Expert can access all functions, while the Inspector can use only those functions that have not been locked out in the
LOCKOUT
menu. Set up the
PASSWORD
function (page 50) before selecting functions for inspectors.
1.
In the
MAIN
menu, scroll to the
CONFIG
submenu using the joystick (
).
2.
Use the joystick (
) to select
LOCKOUT
, and then to enter the function. The function menu (a duplicate of the Main Menu, as
shown in
below) opens.
Figure 16: Lockout Option Window
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
