Chapter 6. Working with Recorded Data
112
DMS Go Operator’s Manual
6.3
Using Existing Data Recorder Files (DR - PROPERTIES) (cont.)
Once thickness measurements are stored in data files, users can quickly locate specific points within a file and locate specific values for all
file parameters. For instance, users can pinpoint a value in a specific grid location, check maximum and minimum values, and t. This section
describes ways you can use the Properties submenu to examine and edit your files.
6.3.1
Moving to a Specific Data Point (DR-PROPERTIES-RECORD)
Note:
To use this function, you must have created a 2-dimension file having ROWs and COLumns. A LINEAR file has LOCATIONS only!
Note:
The described features are available in VIEW mode LIST only.
In the RECORD submenu, you can directly access the specific row and column location of the currently active file.
1.
Be sure the
RECORD
submenu is highlighted in the
PROPERTIES
function (see Figure 29 on page 110).
2.
With the joystick (
) , move to the
ROW
entry. Use the joystick (
) to scroll to the desired selection.
3.
Move down to the
COLUMN
entry. Use the joystick (
) to scroll to the desired selection.
A red outline highlights the selected value at that point in the file. The following entry (Value) also displays the selected value, and the entry
Attachment Type describes any attachment inserted at that point. If you have selected a file containing A-scans, pushing the joystick
horizontally displays the stored A-scan.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
