Chapter 6. Working with Recorded Data
DMS Go Operator’s Manual
117
6.3.4
Editing the File Header (DR-PROPERTIES-HEADER)
Within a
typical data file, several file features are identified with labels. For instance, in a boiler type file, elevation and point names are
assigned as part of the file creation process. The
HEADER
submenu permits you to enter or modify several notations related to instrument
settings, probe serial number, and operator and company identification.
1.
From the
PROPERTIES
menu, use the joystick to highlight the
HEADER
submenu.
2.
Several notation lines appear, including some of the following: Description, Probe, Calibration, Probe, Operator, Company, and others.
(This listing varies, depending on the selected file type). These lines allow the operator to insert notations specific to the active data
file. These notations will then be listed in the header of an outputted report.
Note:
Not all the notation lines listed on the display screen can be modified.
3.
Select the line you wish to modify. For instance, if you wish to add a notation to the PROBE line (typically, the probe’s serial number at
this position), you must first highlight
PROBE
.
4.
Use the joystick (
) to open the keyboard window. Then scroll to each character, and center-press the joystick to add the character to
the text line. When you have finished, press F2 (
CONFIRM)
or F 3 (
SEND)
to add the text to the line.
Note:
Whenever a parameter is changed, it will be stored automatically to the DR file when you leave or replace the file.
5.
Repeat step 4 for each line you wish to edit.
6.
When you have finished, scroll up to exit the
HEADER
submenu.
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
