GE Dash 3000, Руководство по обслуживанию

Страница: 87 / 292

Revision A Dash 3000/4000 Patient Monitor 4-33
2000966-339
Maintenance: Checkout Procedures
Checkout Procedures
Manufacturer Recommendations
These checkout procedures provide service personnel with a method to
verify operational and functional performance of the monitor. Failure to
attain any of the listed results indicates a potential malfunction of the
monitor.
The checkout procedures are based on the assumption that the tested
monitor has known good cables and test equipment. It also requires that
the user be familiar with the operation of all test equipment required for
the checkout procedures. For more information concerning the operation
of these components, refer to the respective operator manual(s).
Frequency
GE recommends that you perform the checkout procedures:
„
Upon receipt of the device.
„
Every 12 months thereafter.
„
Each time the main enclosure is disassembled or a circuit board is
removed, tested, or replaced.
Test Equipment
The following table lists GE recommended test equipment, adaptors, and
cables you need to successfully complete the checkout procedures. The
checkout procedures are written for the test equipment in the following
table. If you use test equipment other than those GE recommends, you
may need to slightly modify some test steps.
Patient Simulators and Cables
ECG Test
„
Marq-I ECG Simulator (no longer available for ordering)
„
MarqII-KIT (includes CO injectate box. No longer available for ordering)
„
MarqIII-KIT (includes CO injectate box)
NOTE
You can use a MarqI, MarqII, or MarqIII patient simulator or an
equivalent 12SL ECG patient simulator.
„
ECG Patient Cable
„
ECG Leadwire Set
Blood Pressure Test
„
Blood Pressure Simulator Adapter Cable (700095-001)
„
Dual BP cable