manualshive.com logo in svg

GE C70, Инструкция по эксплуатации

Mitsubishi Electric C70 - отличное устройство для вашего дома. Установите его легко с помощью Setup Manual. Скачайте бесплатно руководство по эксплуатации на сайте manualshive.com. Получите всю необходимую информацию для комфортного использования продукта.

Поделиться
Скачать
background image

GE Multilin

C70 Capacitor Bank Protection and Control System

5-21

5 SETTINGS

5.2 PRODUCT SETUP

5

Example:

 If this setting is "Yes" and an attempt is made to change settings or upgrade the firmware, the UR device denies

the setting changes and denies upgrading the firmware. If this setting is "No", the UR device accepts setting changes and
firmware upgrade.

This role is disabled by default.

FACTORY SERVICE MODE: 

   When enabled (meaning "Yes" is selected) the device can go into factory service mode. For

this setting to become enabled a Supervisor authentication is necessary. The default value is Disabled.

SUPERVISOR ROLE:

 When enabled (meaning "Yes" is selected) the Supervisor role is active. When "No" is selected this

role is disabled. To disabled this setting a Supervisor authentication is necessary. If disabled, the Supervisor role is not
allowed to log on. In this case the Administrator can change the settings under the Supervisory

 

menu.

If enabled, Supervisor authentication is required to change the settings in the Supervisory menu. If the Supervisor disables
his role after authentication, the Supervisor session remains valid until he switches to another role using MMI or until he
ends the current Supervisor session if using communications.

This role is disabled by default.

SERIAL INACTIVITY TIMEOUT

: The role logged via a serial port is auto logged off after the Serial Inactivity timer times

out. A separate timer is maintained for RS232 and RS485 connections. The default value is 1 minute.

a) SELF TESTS

PATH: SETTINGS 

 PRODUCT SETUP 

 SECURITY 



SUPERVISORY 

SELF TESTS

FAILED AUTHENTICATE

 — When Enabled, the number of failed authentications is compared with the Session Lockout

threshold. When the Session Lockout threshold is exceeded, a minor alarm indication comes up. Operand is 

AUTHENTICA-

TION FAIL

.

FIRMWARE LOCK

 — When Enabled, any firmware upgrade attempt brings up a minor self-test alarm. Operand is 

UNAUTH

FW ATTEMPT

.

SETTINGS LOCK

 — When Enabled, an unauthorized write attempt to a setting for a given role activates a minor self test

alarm. Operand is 

UNAUTH SETTING WRITE

.

PATH: SETTINGS 

 PRODUCT SETUP 

 SECURITY 



SUPERVISORY 

SELF TESTS 

FAILED AUTHENTICATE

CYBERSENTRY SETUP

When first using CyberSentry security, use the following procedure for set up.

1.

Log in to the relay as Administrator by using the Value keys on the front panel to enter the default password
"ChangeMe1#". Note that the "Lock relay" setting needs to be disabled in the 

Security > Supervisory

 menu. When

this setting is disabled, configuration and firmware upgrade are possible. By default, this setting is disabled.

2.

Enable the Supervisor role if you have a need for it.

3.

Make any required changes in configuration, such as setting a valid IP address for communication over Ethernet.

4.

Log out of the Administrator account by choosing None.

Next, device or server authentication can be chosen on the login screen, but the choice is available only in EnerVista. Use
device authentication to log in using the five pre-configured roles (Administrator, Supervisor, Engineer, Operator,
Observer). When using a serial connection, only device authentication is supported. When server authentication is
required, characteristics for communication with a RADIUS server must be configured. This is possible only in the EnerV-

 SELF TESTS

 

 FAILED

 AUTHENTICATE

See below

MESSAGE

FIRMWARE LOCK:

Enabled

Range: Enabled, Disabled 

MESSAGE

SETTINGS LOCK:

Enabled

Range: Enabled, Disabled

 FAILED

 AUTHENTICATE

FAILED AUTHENTICATE:

Enabled

Range: Enabled, Disabled

Содержание C70





































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для C70

Valve Concepts 5400 Installation, Operation And Maintenance Manual preview
5400
Бренд: Valve Concepts Страницы: 16
Sabaj M Series Assembly And Operating Manual preview
M Series
Бренд: Sabaj Страницы: 12
Bartec MAK 3003 Manual preview
MAK 3003
Бренд: Bartec Страницы: 26
VCON VIGO Installation And Setup Manual preview
VIGO
Бренд: VCON Страницы: 48
V2 CU1 Manual preview
CU1
Бренд: V2 Страницы: 48
hager tebis TX100 Operating Manual preview
tebis TX100
Бренд: hager Страницы: 62
hager coviva Smartbox TKP100A Configuration Manual preview
coviva Smartbox TKP100A
Бренд: hager Страницы: 45
Hanna Instruments BL120 Instruction Manual preview
BL120
Бренд: Hanna Instruments Страницы: 54
Hanna Instruments BL 983320-0 Instruction Manual preview
BL 983320-0
Бренд: Hanna Instruments Страницы: 2
Van Air SENTINEL Installation, Operation & Maintenance Instructions preview
SENTINEL
Бренд: Van Air Страницы: 4
Paradox Magellan REM2 Reference And Installation preview
Magellan REM2
Бренд: Paradox Страницы: 2
Centurion TB-CN2R1 Instruction Manual preview
TB-CN2R1
Бренд: Centurion Страницы: 16
OJ Electronics OJ-Air2-WP55 Instructions Manual preview
OJ-Air2-WP55
Бренд: OJ Electronics Страницы: 8
Dantel 44093 Installation & Operation Manual preview
44093
Бренд: Dantel Страницы: 6
JCM GAMMA VERSUS Series Manual preview
GAMMA VERSUS Series
Бренд: JCM Страницы: 111
WAGO 767-4804/000-800 Manual preview
767-4804/000-800
Бренд: WAGO Страницы: 80
Grundfos IO 401 Installation And Operating Instructions Manual preview
IO 401
Бренд: Grundfos Страницы: 20
IBA ibaMS16-DI-220V Series Manual preview
ibaMS16-DI-220V Series
Бренд: IBA Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды