14
2 | General information
2.1 | Reading and keeping the instructions for use
These instructions apply exclusively to the rubber gazzini Handlebar Grips with aluminium trim (for
short: grips) for bikes. They contain important information on installation, safety and the warranty.
Read the instructions carefully, especially the safety instructions, before installing the grips. Failure
to follow the instructions can result in damage to the grips themselves or to your vehicle, render it
less safe to ride on the road, and possibly cause consequential damage. Keep these instructions for
future reference. If you pass the grips on to a third party, you must also hand over these instructions.
The instructions for use are based on the standards and regulations applicable in the European
Union and reflect current state-of-the-art technology. If abroad, you should also observe any country-
specific guidelines and laws.
2.2 | Explanation of symbols
The following symbols and signal words are used in these instructions.
3 | Safety
3.1 | Intended use
These handlebar grips are intended for replacing worn grips or improving the appearance of the
motorcycle.
The grips are designed for motorbike handlebars with an outside diameter of 22 mm (metric). To
ensure that the grips are used correctly and safely on your motorcycle, it is imperative that you
adhere to the specifications in your vehicle operating instructions and the stipulations of the vehicle
manufacturer.
The grips must only be used as described in these instructions. Any other use is considered improper
use and can result in material damage. The manufacturer and supplier accept no liability for damage
caused by improper or incorrect use.
WARNING!
This symbol/signal word indicates a hazard with a medium risk level
which, if not avoided, may result in death or serious injury.
CAUTION!
This symbol/signal word indicates a hazard with a low risk level which,
if not avoided, may result in minor or moderate injury.
IMPORTANT!
This signal word warns of possible material damage.
This symbol indicates useful additional information about assembly or
usage.
This symbol indicates that the packaging and product can be recycled.
