Gateway 9515, Руководство пользователя

Страница: 87 / 194

82
www.gateway.com
9
While holding the blue lever in, line up the holes in the replacement PCI riser
connector with the riser retention pins, then place the connector on the retention
pins.
10
Slide the PCI riser connector toward the front of the PCI riser assembly, then release
the blue lever, locking the connector into place.
11
Follow the instructions in “Installing a PCI expansion card” on page 83 .
12
Replace the PCI riser assembly by following the instructions in “Removing and
installing the PCI riser assembly” on page 79 .
13
Follow the instructions in “Installing the processor air duct” on page 50 .
14
Follow the instructions in “Closing the server case” on page 46 .
15
See the card’s documentation for software installation instructions.
Removing a PCI expansion card
To remove a PCI expansion card:
1
Follow the instructions in “Preventing static electricity discharge” on page 43 . Make
sure you turn off the server, then unplug the power cord and all other cables connected
to the server.
2
Follow the instructions in “Opening the server case” on page 44 .
3
Follow the instructions in “Removing the processor air duct” on page 47 .