Gateway 9515, Руководство пользователя

Страница: 107 / 194

102
www.gateway.com
11
Holding the new backplane by the edges only, slide the backplane into place in the
chassis until the pins at the right and left sides of the backplane bracket are fully
inserted into the matching holes in the right and left guides in the chassis.
12
Connect the flex cable, the 2×3 power cable, and the front panel cable to the
backplane.
13
Follow the instructions in “Installing the air baffles” on page 53 .
14
Follow the instructions in “Replacing the fan module” on page 85 .
15
Reinstall the drives back into the server. Make sure that you install the drives into
the same bays you removed them from in
Step 4 . For instructions see “Installing a
diskette in a converted hard drive bay” on page 56 , “Installing a CD or DVD drive”
on page 61 , and “Installing a hard drive” on page 64 .
16
Replace the bezel by snapping it into place on the front of the server.
17
Follow the instructions in “Closing the server case” on page 46 .
Caution Pressing or pulling on any components on the backplane could result
in damage to the backplane.
Caution Make sure you do not pinch, bind, or damage any cables as you install
the backplane.
Left guide
Right guide