Gateway 9515, Руководство пользователя

Страница: 53 / 194

48
www.gateway.com
3
Lift the processor air duct from the chassis.
Removing the processor air dam
If you are adding a second processor to a single processor system, you need to remove the
air dam located on the underside of the processor air duct.
To remove the processor air dam:
1
Follow the instructions in “Preventing static electricity discharge” on page 43 . Make
sure you turn off the server, then unplug the power cord and all other cables connected
to the server.
2
Follow the instructions in “Opening the server case” on page 44 .
3
Follow the instructions in “Removing the processor air duct” on page 47 .
Caution If you add a second processor to your server, you must remove the
processor air dam or the processor may overheat, causing possible
data loss and damage to the processor.