Gateway 9515, Руководство пользователя

Страница: 58 / 194

53 www.gateway.com
Installing the air baffles
To install the air baffles:
1
Place the small air baffle into the chassis behind the drive backplane, routing the cables
as noted in the removal process.
2
Engage the hooks on the baffle with the matching slots on the back of the drive area.
3
Install the hot-swap drive backplane by following the instructions in “Replacing the
hot-swap backplane” on page 100 .
4
Install the fan module by following the instructions in “Replacing the fan module”
on page 85 .
5
Place the large air baffle into the chassis between the power supply and the hot-swap
drive backplane, routing the cables as noted in the removal process.
Caution To ensure continued, reliable operation, always operate your server
with the appropriate air ducts, air dams, and baffles in place. Failure
to do this could result in equipment damage.