Gaspardo DP, Использование и обслуживание

Страница: 30 / 62

USE AND MAINTENANCE
30
ENGLISH
cod. 19501170
g
CAUTION
- The form dimensions and material of the drive shaft
elastic pins have been chosen for safety. The use of
pins not original or more resistant, could cause serious
damage to the seeding machine.
- Avoid curves with the machine grounded, neither work
in reverse.
- Maintain a seeding speed compatible with type and
cultivation of the soil in order to avoid breakages or
damage.
- Lower the seed drill when the tractor is in forward gear,
to avoid clogging or damage to the planter shoes; for
the same reason the tractor should not reverse when
the seed drill is on the ground.
- Make sure that no foreign material (rope, sack paper)
enters the storage tank when seed is being loaded.
DANGER
The seeder can transport treated chemical substances
together with the seed. Do not allow children, people, pets
to come near the seeding machine.
ATTENTION
Keep away from the seed storage tank and refrain from
attempting to open it when the seeder is working or about
to begin working.
4.0 CONTROL INSTRUMENTS
On request the Manufacturer can equipment for controlling seeding
and reading the number of hectares sown.
Electronic hectare counter
The HC model displays the number of hectares seeded, showing
both the partial and total number. Instructions for assembly and
use are supplied together with the equipment.
Multi-control tramline
Allows for: the electronic cut-out of 2+2 rows; reading of the
hectares seeded; checking of seed level; check that the fan is
rotating properly; check that the distributor is rotating properly.
5.0 MAINTENANCE
Here follows a list of various maintenance operations to be carried
out periodically. Lowered operating costs and a longer lasting
seeding machine depend, among others, on the methodical and
constant observation of mese rules.
CAUTION
- The maintenance periods listed in this booklet are only
indicative and are for on normal conditions on use,
therefore be varied depending the kind of service, the
more or less dusty surroundings, seasonal factors, etc.
For more serious conditions of service, maintenance
will logically be done more often.
- Before injecting grease, the nipples must be cleaned
to avoid mud, dustand foreign bodies from mixing with
the grease, otherwise they will reduce or even annul
the effect of the lubrication.
ATTENTION
Always keep oils and grease out of reach of children.
Always read warnings and precautions indicated on the
containers carefully.
Avoid skin-contact.
After use wash the equipment thoroughly.
Treat the used oils and polluting liquids in conformity with
the laws in force.
5.0.1 WHEN THE MACHINE lS NEW
- After the first hours of work check that all the bolts are still
tight.
- Grease the furrowing tools.
5.0.2 AT THE BIGINNING OF THE SEEDING SEASON
- Operate the empty seeding machine, the air-flow frees the pipes
from condensation and removes eventual impurities.
- Grease the planting unit.
- During periods of use, check the oil level in the overgear and
tank daily; top-up if necessary.
5.0.3 EVERY 20/30 WORKING HOURS
- Check the tightness of the bolts on the listers.
- Grease the transmission chains.
- Grease the row marker disks.
- Lubricate the power take-off regularly, according to the
instructions of the manufacturer.
- Lubricate the transmission oscillating arm, at least once a year
5.0.4 EVERY 50 WORKING HOURS
- Clean the distributor carefully and thoroughly.
- Grease the row marker arm pin.
- Grease the folding arm supports of the frame.
- Carry out a complete oil change in the overgear and tank using,
respectively, ESSO OIL SAE W80-90 and OIL OSO 32.
5.0.5 EVERY SIX MONTHS
- Grease the drive wheel bearings.