Gaspardo DP Скачать руководство пользователя страница 19

Страница: 19 / 62

cod. 19501170

ENGLISH

1.0 INTRODUCTION

This booklet describes the regulations for use, maintenance and
the parts that are supplied as spares.
This booklet is an integrating part of the product, and must be
kept in a safe place for consultation during the whole life span of
the machine.

1.1 DESCRIPTION OF THE SEEDER

This farming implement, can only be operated by a farming tractor
equipped with lift unit and universal three-point hitch.

The seeder is suitable for use on no tilled soil.

It is suitable for sowing cereal:

wheat, barley, rye, oats, rice.

For minute and forage seeds:

rape, clover, sedge, rye-grass.

For coarse seeds:

soya, peas.

Seeds are laid down on the ground by means of ploughing devices,
planter shoe and they are distributed continuously.
The quantities to distribute are set through a seed distributor, the
motion of which derives from the crawler wheel through traction.
The arms of the furrowing tools, independent of each other, dispo-
se of a wide margin of oscillation to adapt to the surface of the
ground.

ATTENTION

The seeder is suitable only for the uses indicated. Any other
use different from that described in these instructions
could cause damage to the machine and represent a
serious hazard for the user.

Regular operation depends on the correct use and adequate
maintenance of the equipment. It is advisable therefore to observe
scrupulously what is described in order to prevent any
inconveniences that could prejudicate proper operation and
duration.
It is just as important to keep to what is described in this booklet
since

the Manufacturer declines all responsibility due to

negligence and non-observance of these rules.

At any rate the Manufacturer is available to assure immediate and
accurate technical assistance and all that may be necessary for the
improved operation and better performance of the equipment.

1.2 GUARANTEE

On delivery, check that the equipment has not been damaged
during transport and that the accessories are integral and com-
plete.

- Possible claims must be presented in writing within

eight days of receipt.

The purchaser will enforce his rights on the guarantee only
when he has respected the conditions concerning the benefit
of the guarantee, set out in the supply contract.

The guarantee is valid for a year, against all defects of material,
from the date of delivery of the equipment.

The guarantee does not include working and shipping costs
(the material is shipped at the consignee’s own risk).

Obviously, all damage to persons or things are excluded from
the guarantee.

The guarantee is limited to the repair or replacement of the
defective piece, according to the instructions of the
Manufacturer.

Dealers or users may not claim any indemnity from the Manufacturer
for any damage they may suffer (costs for labor, transport, defective
workmanship, direct or indirect accidents, loss of earnings on the
harvest, etc.).

1.2.1 EXPIRY OF GUARANTEE
Besides what has already been set out in the supply
contract, the guarantee expires:

If the limits set out in the technical data table are overshot.

If the instructions set out in this booklet have not been carefully
followed.

If the equipment is used badly, defective maintenance or other
errors by the client

If modifications have been carried out without written
authorization of the manufacturer and if non original spare parts
have been used.

1.3 IDENTIFICATION

Each single piece of equipment, is equipped with an identification
plate (11 fig. 1), which bears:

mark

Manufacturers mark

Name, business name and address of the Manufacturer;

Type of machine

Registration of the machine