Garmin GPSMAP 235 Sounder Скачать руководство пользователя | Manualshive

Страница: 4 / 119

background image

The GPS system is operated by the United States government, which is solely

responsible for its accuracy and maintenance. The system is subject to changes
which could affect the accuracy and performance of all GPS equipment. Although
the GARMIN GPSMAP 235 Sounder is a precision electronic NAVigation AID
(NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become
unsafe.

Use the GPSMAP 235 Sounder at your own risk. To reduce the risk of unsafe

operation, carefully review and understand all aspects of this Owner’s Manual—and
thoroughly practice operation using the simulator mode prior to actual use. When in
actual use, carefully compare indications from the GPSMAP 235 Sounder to all avail-
able navigation sources, including the information from other NAVAIDs, visual
sightings, charts, etc. For safety, always resolve any discrepancies before continuing
navigation.

NOTE: The GPSMAP 235 Sounder generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation. If the sounder does cause
harmful interference, the user is encouraged to try to correct the interference by relo-
cating the equipment or connecting the equipment to a different circuit. Consult an
authorized dealer or other qualified technician for additional help if these remedies
do not correct the problem.

The GPSMAP 235 Sounder complies with Part 15 of the FCC limits for class B

digital devices. Operation is subject to the following conditions: (1) The sounder
may not cause harmful interference, and (2) the sounder must accept any interfer-
ence received, including interference that may cause undesired operation.

ii

Caution

INTRODUCTION

Cautions

CAUTION!

The GARMIN GPSMAP 235 Sounder has no
user-serviceable parts. Should you ever
encounter a problem with your unit, please take
it to an authorized GARMIN dealer for repairs.
Any attempt to open the case to change or mod-
ify the unit in any way will void your warranty
and may result in permanent damage to the
equipment.

19000138.10A.QXD 11/11/99 8:46 AM Page ii

«
...
2
3
4
5
6
...
»

Содержание GPSMAP 235 Sounder
























































































































Отзывы:

Нет отзывов

Похожие инструкции для GPSMAP 235 Sounder

Бренд: YachtSafe Страницы: 4

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 12

GPSMAP 700 Series

Бренд: Garmin Страницы: 6

Nuvi 205 Series

Бренд: Garmin Страницы: 64

GPSMAP GPSMAP 196

Бренд: Garmin Страницы: 124

Бренд: Advantech Страницы: 13

Бренд: F-Tech Страницы: 10

Бренд: Nextar Страницы: 1

Бренд: Garmin Страницы: 2

AQUAMAP 80 Series

Бренд: Garmin Страницы: 36

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 12

FreeWAY SX 7.2 IPS

Бренд: Modecom Страницы: 4

Бренд: Fastrax Страницы: 20

Бренд: iGolf Страницы: 18

Бренд: RUPTELA Страницы: 42

Бренд: Kestrel Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды