PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
96
5.9. Maintenance
5.9.1. Users
To create/remove/modify a user group, go to Setup > Maintenance or Basic Configuration >
Users.
How to add a user
To add a user for the webpage,
1.
Go to Setup > Maintenance or Basic Configuration > Users.
2.
Click Add below the User List.
3.
When the pop-up window appears, type a user name and password.
Limitation on user name
User name must begin with an English alphabet letter.
Length: The length of user name must be between 4 and 32.
Accepted characters: All upper or lower case alphabet letters from “a” through “z”, numbers
from 0 to 9, and underscore “_”.
Note
i
Allowed length of user name varies depending on the firmware version. The
version lower than1.7.0.7 allows the length between 3 and 32.
Limitation on password
Length: The length of password must be between 4 and 32.
Accepted characters: All upper or lower case alphabet letters from “a” through “z” and
numbers from 0 to 9
Note
i
The maximum length of password varies depending on the firmware version.
The version lower than1.7.0.7 allows the length between 4 and 8. Symbols
are accepted in the password in the firmware version 1.11.0.7 or higher.
4.
Select a User Group for the new added user.
Note
i
Admin can use all the menus on the webpage, but Viewer/Operator can
access Live Page only. Following are menus (or features) that Viewer/Operator
can use on the live page.
-Selection of stream type
-Adjustment of “Live Windows” size
-Video control for local recording
-PTZ control (only for operator)
Содержание PixelPro GXi Series
Страница 1: ... FW Version 1 12 0 8 ...