PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
80
5.4.12. Wireless LAN
Note: This part is for the camera with wireless LAN module only.
To configure the wireless mode, the device needs to be connected to a wired network for the
first time. Setup > Network Configuration > Wireless LAN
1.
From the USB Wireless AP List tab, select the wireless network where the device will be
located under. Provide the network key (password).
2.
From Wireless network IP configuration tab, select Obtain an IP address via DHCP or Use
the following IP address.
A.
Use “Obtain an IP address via DHCP” if you want network to provide automatic address.
B.
Use “Use the following IP address” and type specific addresses if you want the device to
use specific designated address.
3.
Click Apply button and wait for system to correspond.
4.
Disconnect the wired cable from the camera and wait for 10~15 seconds.
5.
Use IPAdminTool.exe to identify the device or type URL in Windows Explorer to access.
Link-Local Address
This is a built-in function that assigns the device an additional IP address, which can be used to
access the unit from other hosts on the same segment of the local network. An IP address is
automatically assigned when the camera boots up.
The camera can have both a Link-Local IP and a static/DHCP-supplied IP address at the same
time. The IP address block is from 169.254.1.0.to 16.254.254.255.
Содержание PixelPro GXi Series
Страница 1: ... FW Version 1 12 0 8 ...
