Ganz PixelPro GXi Series, Руководство пользователя

Страница: 49 / 110

PixelPro GXi Series Web Page User’s Manual V1.12.0.8
07-2017-A 49
- Hold the status for the duration
You can keep the DO (alarm) with the selected status (active or inactive) for the configured
duration.
- Active: If you check this option, DO will be activated when there is an event.
- Inactive: If you check this option, DO will be deactivated even when there is an event
detected.
Specify the alarm duration. Duration indicates how long the DO works, which can be adjusted
from 0 to 600 seconds. If you select Unlimited, DO will last long until you manually turn it off.
- Synchronize with the event source(s)
This option enables the DO to work during the event generation by the event source(s). Thus,
DO would start working from the moment that the event is generated and finish working at
the moment the event ends.
- Min hold-on time: The DO status maintains for the configured time period after the
event ends. The Unlimited option keeps the DO status after the event ends. The DO
status maintains until you manually turn it off.
Note
i
The following event sources are compatible with the DO’s event action,
‘Synchronize with the event sources’:
- Sensor (Available only when the DI at Setup > Peripheral has been selected with
‘Level trigger’)
- Alarm (Available only when the DO at Setup > Peripheral has been selected with
‘Level trigger’)
- Motion Detection.
- Face Detection
- Network loss / detect (only when the trigger mode, ‘Both’ has been selected)
- Video loss / detect
- VCA source (event rules configured for zones & tamper detection with the trigger
mode, ‘both’ selected)
- Schedule
- Storage error

Recording
Select the check box to record the video, audio and meta data to the preconfigured FTP or SD
memory card when the event is triggered. To use this event action, make sure that the
recording type is set as Event. It can be configured at Storage > Recording > Configuration.
- Prebuffer/Postbuffer: Specify the recording duration before and after the event occurs. But
the buffer bar will be inactive when the following options are selected for Event Source
configuration.
1) Either Network Loss/detect or Schedule is selected.
2) Both of Network loss/detect and Schedule are selected.
- Attached thumbnail (or face image): Selecting this checkbox will attach a thumbnail or face
image for recording.