PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
38
Profile Identification
This option allows users to select between three H.264 different profiles. This directly affects
the quality
of the video due to the amount of compression applied. Baseline profile provides
maximum compression to the video. High profile gives the best quality. Selecting the Main
profile is balances between the other two.
Bit Rate Control
-
Variable Bit Rate (VBR)
VBR allows a higher bitrate (and therefore more storage space) to be allocated to the
more complex segments of media files while less space is allocated to less complex
segments. It is used when the system has enough storage and a high quality image is
required. However, there is a limit, ‘Maximum bitrate’ to be configured to control the
CPU usage. Image quality can be configured as highest, high, normal, low and lowest.
-
Constant Bit Rate (CBR)
CBR mode maintains the defined bitrate level all the time.
Snapshot Configuration
Once ‘Enable snapshot’ is ticked, it will not stop until the checkbox is unchecked and ‘Apply’ is
pressed.
Enable snapshot
Tick Enable snapshot to enable snapshot on the selected stream.
Resolution
The supported resolution for the product is listed on the drop down box. Select the desired
resolution. If one of the video streams is set to 1080P, other video stream resolution cannot be
used as greater than 1088 horizontal.
Maximum FPS
Enter how many snapshot files you want to send per a second. The maximum value is 5.
JPEG quality
Enter the JPEG quality. The range is from 0 to 100 and ‘100’ means the best quality.
Audio Configuration
Enable audio
Select the Enable check box for the microphone or speaker to be enabled.
Audio Input
Volume: Enter the audio input volume. The available range is from 0 to 225.
Codec: G.711 is supported for the audio codec.
Sampling Frequency: The sampling frequency is selectable between 8 kHz and 16 kHz.
Audio Output
Volume: Enter the audio output volume. The available range is from 0 to 255.
TCP/IP listen port: Set the port for listening to the audio received from the camera. The default
is 6000 and the range is from 1 to 65535.
Note
i
After the setting, make sure to click OK to save changes.
Содержание PixelPro GXi Series
Страница 1: ... FW Version 1 12 0 8 ...