PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
44
You can check the defined profile list on the main page, and add, copy, modify or remove an
event rule.
1.
Tick the checkbox of Enable event rules under Configuration tab, and click apply to
begin creating event rules.
2.
Click Add to create an event rule, and select desired Event Sources when a pop up
window of Add to Event Rule List appears.
3.
Click Event Action tab to select desired Event Actions.
4.
Name the event rule on the Configuration section, and tick Enable Rule if you want to
use the event rule, and then click OK.
5.
Clicking on an event rule in Event Rule List will display the detailed information about
the highlighted event rule.
If you want to copy a profile of an existing event rule, highlight the desired event rule, and
click Copy. Copying an event profile allows you to easily create multiple profiles with the
same configuration. Clicking Modify enables you to modify the profile of the highlighted
event rule. Clicking Remove will get rid of the highlighted event rule from Event Rule List.
Note
i
The maximum number of event rules is 8.
* Please see the following pages for the detail about the event sources and event actions.
Event Source Configuration
Note
i
The supported event source may be different depending on the
hardware/software specification of each model.
The event sources can be categorized into three different groups for their mutually exclusive
operations. Thus, when any source from each group is enabled, all the other sources of the
other two groups are disabled.
Note
i
Schedule is a supplement to help event sources become more time specific.
Содержание PixelPro GXi Series
Страница 1: ... FW Version 1 12 0 8 ...