Galil Visual-ICE MRI, Руководство пользователя

Страница: 48 / 122

4-6 User Manual
4.4 Connecting Gas Cylinders
WARNING. Do not connect the Visual-ICE MRI Cryoablation System to a gas supply exceeding
6000 psi (414 bar, 41.4 MPa) to avoid damage to internal system components.
WARNING. Ensure that the gas cylinders are chained to a wall or an approved cart to prevent
inadvertent tipping of the cylinders.
CAUTION.
Galil Medical recommends having additional backup argon cylinders available for each
treatment.
CAUTION. Turn the Visual‑ICE MRI Cryoablation Console ON before connecting the gas cylinders to
ensure the proper diagnostic tests are conducted .
1. Position the gas cylinder(s) close enough to the Visual‑ICE MRI Cryoablation Console to ensure
that the gas supply line is not stretched and does not present a trip hazard.
2. On the rear of the Console, ensure that the Manual Vent Valve is in the CLOSED position
3. Remove the humidity covers from the helium and argon inlets on the Console.
4. Secure the safety cable at the end of the gas supply line to the Console.
WARNING. Ensure that the safety cable is properly secured to the Console in case the gas
supply line becomes accidentally disconnected.
5. Connect the helium high‑pressure gas supply line to the helium inlet of the Console using the
quick‑connect connector located at the rear of the system.
2
3
1
Figure 4-1. Visual-ICE MRI Console Gas Connections
1 Safety cable
2 Quick‑connect connectors
3 Humidity cover
6. Route the helium gas supply line through the supply line clip on the Console.
7. Connect the helium high‑pressure gas supply line to the helium cylinder by securing the gauge
assembly adapter onto the cylinder connection (Figure 4‑2).