Galil Visual-ICE MRI, Руководство пользователя

Страница: 91 / 122

Visual-ICE
™
MRI Cryoablation System
10-11
Symptom Potential Causes / Solutions
The STOP ALL button does not
respond
1. Press the STOP ALL button on the Console.
2. Verify that the system is powered on.
3. Verify that the Junction Box Harnesses are connected.
4. Contact Galil Medical Customer Service.
10.8 Needles
Symptom Potential Causes / Solutions
During the freeze phase or
following a thaw phase, no iceball
forms on the needle(s) in a given
channel
1. Perform the following steps in the order in which they are
described:
•
Stop freezing/thawing actions for all channels.
• Thaw the problematic needle(s) for at least 1 minute.
• Freeze the needle(s) to verify proper function.
2. If the problem persists, connect a new needle into a
different channel and test the needle. Continue the
procedure with the newly tested needle.
During the Needle Integrity and
Functionality test: Bubbles are
seen escaping from the needle
WARNING. Do not use the needle.
• Disconnect the needle from the Mobile Connection
Panel and segregate the needle.
• Return the needle to Galil Medical for evaluation.
•
Use a new needle to continue the procedure.
•
Test the new needle to confirm the integrity and
functionality of the new needle.
• Contact Galil Medical Customer Service for further
instructions upon completion of the procedure.
Needle was bent or damaged
while attempting to unpack or
use it
WARNING. Do not use the needle.
•
Segregate the needle.
• Use a different needle to continue the procedure.
• Contact Galil Medical customer service for further
instructions upon completion of the procedure.