manualshive.com logo in svg

Galil Visual-ICE MRI, Руководство пользователя

Поделиться
Скачать
Galil Visual-ICE MRI Скачать руководство пользователя страница 43

Visual-ICE

™

 MRI Cryoablation System

4-1

4 SYSTEM SETUP

Table 4-1

 depicts the order and steps of Visual-ICE™ MRI Cryoablation System setup.  This section 

describes each step in detail.

Table 4-1. System Setup Flow

1.

System  

Set-Up

 

•

Confirm availability of gas, needles, and accessories

 

•

Position Visual-ICE MRI Mobile Connection Panel in 

the magnet room and lock all wheels

 

•

Position Visual-ICE MRI Console in the control room 

and lock brake

 

•

Ensure Manual Vent Valve is closed and Argon 

Shut‑off Valve is ON

 

•

Power Visual‑ICE MRI Console ON

 

•

Login

2.

Connect Gas 

Cylinders

 

•

Connect the helium gas supply line to the Console 

and then connect the gas supply line to the helium 

cylinder

 

•

Connect the argon gas supply line to the Console 

and then connect the gas supply line to the argon 

cylinder

 

•

Ensure the safety cables are connected

3.

Connect 

Junction Box 

Harnesses

 

•

Connect Junction Box Harness in the control room

 

•

Connect Junction Box Harness in the magnet room

 

•

Ensure the safety cables are connected

 NOTE:

 Drape harnesses to avoid trip hazards

4.

Open Gas 

Cylinder Valves

 

•

OPEN valve on helium, then argon

 

•

Verify gas pressure is within working limits for the 

cryoablation procedure (reference Table 4-2)

4.1  Preparation for Use

Prior to using the Visual‑ICE MRI System, inspect the Console, Mobile Connection Panel, power 

cord, brakes, safety cables, gas supply lines, gas connections, Junction Box Harnesses, and the 

monitor touch screen to ensure they are not damaged.  

If any of the components are damaged, contact Galil Medical Customer Service.  

CAUTION.

  If condensation is present on the system, allow the system to dry completely for 12 hours 

prior to powering up the system. Powering up the system with condensation could result in permanent 

damage to the electrical boards, causing the system to be inoperable.

Содержание Visual-ICE MRI



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды