Galil Visual-ICE MRI, Руководство пользователя

Страница: 68 / 122

6-2 User Manual
Screen 6-2. Linked Channels
3. Press the Unlink button (accessed by pressing and holding the Channel button) to remove the
link between two channels so that each operates independently.
6.1.3 Cycle Programming Control
1. Press and hold the Channel button to enter
Advanced Channel Controls
for that channel.
2. Press the Cycles button to enter
Advanced Cycle Controls
to program freeze-thaw cycle(s)
(Screen 6-3).
Screen 6-3. Advanced Cycle Controls
3. Select the desired freeze intensity from the
Freeze
controls using the drop-down menu and the
freeze duration (in minutes) using the arrows or the scroll bar.
4. Add the programmed freeze cycle to the Cycle Sequence menu using the left
Arrow
button next
to the Freeze controls.
5. Select the desired thaw by clicking on the available options in the
Thaw
controls. Select the thaw
duration (in minutes) using the arrows or the scroll bar.
6. Add the programmed thaw cycle to the
Cycle Sequence
menu using the left Arrow button next to
the
Thaw
controls.
7. Program additional cycles by repeating Steps 3 through 6 as appropriate.
8. Arrange the cycle sequence by highlighting a programmed cycle on the
Cycle Sequence
controls.
Using the Up or Down button, move the cycle into the desired sequence.