74
4. Operation of systems and equipment
NOTE
If you forget to turn off the position lamps
when the ENGINE START/STOP button is
set to the “OFF” position and the vehicle is
not locked, the position lamps will stay on for
about 15 min and then go out automatically
in order to save the battery power; when the
ENGINE START/STOP button is set to the
“OFF” position and the vehicle is locked, the
position lamps will go out immediately.
WARNING
● When driving the vehicle at night or
on a road with poor visibility, also
use other lamps in addition to the
position lamp. Otherwise, accidents
may easily occur.
● When temporarily parking the vehicle
at night or on a road with poor
visibility with the need of indicating
the position of the vehicle, do not
use the position lamps as the parking
lamps but be sure to turn on the
hazard warning lamp due to the
battery power saving function of the
position lamps.
Low beam
-
Rotate the lamplight switch to the
position to turn on the low beam.
High beam
-
After turning on the low beam, if you push
the lamplight combination switch forward
to the limit position, the high beam will be
turned on and the corresponding indicator
lamp
on the instrument cluster will
come on.
-
If you pull the lamplight combination
switch backward to the original position,
the high beam will be turned off.
Headlamp flashing
-
If you pull the lamplight combination
switch backward to the limit position, the
high beam will be turned on.
-
If you release the switch, the lamplight
combination switch will automatically
return to its original position and the high
beam will be turned off.
NOTE
● The high beam may cause dazzling to
drivers of oncoming vehicles at close
range and possibly result in an accident
thereafter. Therefore, please use the
high beam reasonably.
● When all the lamps are turned off, if you
pull and hold the lamplight combination
switch backward, the high beam will
stay on, and the corresponding indicator
lamp
on the instrument cluster will
come on.
