183
5. Driving guide
Settings of AVM
1. Trajectory
-
The trajectory is displayed in the top view
and 2D view after the trajectory switch
is turned on, and the trajectory is not
displayed in the top view and 2D view
after the trajectory switch is turned off.
-
This function can be set “On” or “Off” in
the “Settings” item of the panoramic view “.
2. P gear exit
-
When the P gear exit switch is set as
“immediate”, the panoramic view will be
exited immediately after the gear is shifted
to P gear; When the P gear exit switch
is set as “after 30 s”, the panoramic view
will be exited after the gear is shifted to P
gear for 30 s.
-
This function can be set “On” or “Off” in
the “Settings” item of the panoramic view
(there will be differences under multiple
panoramic display conditions, subject to
the actual vehicle).
3. Panoramic view activation via turn signal
lamp
-
When the turn signal lamp-panoramic
view activation switch is turned on, if the
vehicle speed is within 20 km/h and the
left/right turn signal lamp switch is turned
on, the panoramic 2D left/right view will be
displayed, and if the left/right turn signal
lamp switch returns, the panoramic view
will exit.
-
This function can be set “On” or “Off” in
the “Settings” item of the panoramic view.
NOTE
● When the AVM is turned on, the AV
system will start to display the images
taken around the vehicle, and some
auxiliary lines and radar prompt
information will be displayed on the
images.
● The system will automatically switch
off if the forward speed of the vehicle is
greater than 20 km/h.
● The system will automatically switch off
when the vehicle is in non-”R”gear and
the system is activated for more than 30
seconds.
● If the AV system is not completely
activated, the system cannot function
properly.
