178
5. Driving guide
Distribution of RPA sensors
The radar sensor is mounted on the rear
bumper cover.
CAUTION
● Always keep the surface of radar sensor
clean and do not cover the radar sensor.
● To ensure the function of the radar
sensor, it should be kept clean and free
from ice.
● When cleaning the radar sensor surface,
use a soft wet cloth to avoid scratching
the surface.
WARNING
● The RPA cannot replace the driver’s
observation of the surrounding
environment. The driver should
concentrate and reverse the vehicle
safely according to the actual
situation.
● The radar sensor has a blind spot
when detecting obstacles. When
reversing, the driver must pay
attention to observing to avoid
accidents.
● When reversing in a narrow place
or uphill, the radar sensor may
not detect railings, trees, or slope
surfaces, which is normal.
● When the reversing speed is fast,
the detection accuracy of the
radar sensor will decrease. It is
recommended that the speed should
not exceed 10 km/h. When the
RPA sends the continuous alarm,
the vehicle is very close to the
obstacle at this time. Stop reversing
immediately to prevent accidents.