131
5. Driving guide
NOTE
● If the EPB button is pressed without
depressing the brake pedal, the EPB
will not be released, and the instrument
cluster will display an alarm message
accompanied by a buzzer alarm.
● When the EPB is released, running
noise will be generated, which is normal.
● When the battery is low, the system
cannot release the EPB. If conditions
permit, you can connect a jumper cable
for emergency start, and then release
the EPB. Contact the GAC Motor
authorized shop for inspection and
repair.
● If the EPB has not been used for a long
time, the system will perform automatic
test, and operation noise will be heard
at this time.
● Press and hold the EPB button and
press the ENGINE START/STOP button
at the same time to turn off the power of
the whole vehicle to realize towing with
power “OFF”.
Application of dynamic emergency braking
-
If the service brake fails during vehicle
driving, try to continuously pull up the EPB
button, and then release the EPB button
or step on the accelerator pedal to exit the
emergency braking.
NOTE
● When the vehicle is running, if the
EPB system button is pulled up, the
instrument cluster display will give an
alarm message, together with a beep
alarm.
● When the vehicle is slowing down,
release the EPB button or depress
the accelerator pedal to release the
parking brake again. If the EPB button is
continuously pulled up until the vehicle
stops, the parking brake will remain
engaged.
CAUTION
Do not use dynamic emergency braking
unless necessary, as it is likely to
cause traffic accidents. Moreover, the
braking distance is longer than braking
by depressing the brake pedal, and the
service life of the parking brake system will
be shortened.
