184
5. Driving guide
NOTE
● When gearshift lever is in the “R” gear,
the image display defaults to single 2D
rear view.
● When gearshift lever is in the “R” gear,
the image display defaults to single 2D
rear view.
● The 2D and 3D modes are memorized
(except for the defaulted 2D rear view in
R gear), while the wide angle view is not
memorized. If it is in 2D mode before
exiting the AVM, it will be in 2D mode by
default when you enter next time.
● The message pop-up window is only
displayed when there is a message, and
not displayed at other times.
NOTE
● On the wide angle interface, you can
view different camera views of “front
wide angle”, “rear wide angle”, “front
wheel” and “rear wheel”.
● When the left turn signal lamp is turned
on, the image display switches to single
2D left view; when the right turn signal
lamp is turned on, the image display
switches to single 2D right view;
● The user can manually switch the view
via the “view” soft key, and the image
display shows the corresponding view.
Camera distribution
The front camera is installed under the front
logo.
