XG1200 User's Guide
227/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Message ID
Severity
Message/Explanation/Solution
S1950
CRITICAL
Oops: %1$, sig: %2$
Explanation
An unhandled exception caused a system panic.
[[Inserted string]]%1$: Details about error
[[Inserted string]]%2$: Signal number
Solution
Note this message and those displayed above and below it and contact your XG1200 sales representative. This
message may not be recorded in the log.
S1951
CRITICAL
Kernel panic: %1$
Explanation
The software detected a status error during processing and raised a system panic.
[[Inserted string]]%1$: Details about error
Solution
Note this message and those displayed above and below it and contact your XG1200 sales representative. This
message may not be recorded in the log.
A.2.3
kernel (Layer 2 Basic Control: 2000-2999)
Message
IDSeverity
Message/Explanation/Solution
P2000
CRITICAL
Can't allocate network device structure.
Explanation
Failed to allocate the control area for the switch chip.
Solution
Note the message contents and contact your XG1200 sales representative.
P2001
CRITICAL
Can't allocate h/w private structure.
Explanation
Failed to allocate the control area for the switch chip.
Solution
Note the message contents and contact your XG1200 sales representative.
P2002
CRITICAL
Failed to Memory Map.
Explanation
Failed to map memory for the switch chip.
Solution
Note the message contents and contact your XG1200 sales representative.
P2003
CRITICAL
Unsupported Switch Chip or Not Found : 0x%1$
Explanation
Failed to detect the switch chip.
[[Inserted string]]%1$: Displays supplementary code for the error.
Solution
Note the message contents and contact your XG1200 sales representative.
P2004
CRITICAL
Buffer Configuration is done by Jumper.
Explanation
An error was detected in the switch chip configuration.
Solution
Note the message contents and contact your XG1200 sales representative.
S2005
CRITICAL
Failed to BIST.
Explanation
A fault was detected during the switch chip self-test.
Solution
Note the message contents and contact your XG1200 sales representative.
S2006
CRITICAL
%1$: Failed to register IRQ. errno = %1$
Explanation
Failed to register interruption handling for the switch chip.
[[Inserted string]]%1$: Additional information on the error
[[Inserted string]]%2$: Supplementary code for the error
Solution
Note the message contents and contact your XG1200 sales representative.