![background image](http://html.mh-extra.com/html/fujitsu/xg1200/xg1200_user-manual_121657078.webp)
XG1200 User's Guide
78/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Note
When copied in the volatile memory, the information will be lost when the system is restarted.
If uploading is necessary, restart the system after storing the data in the TFTP server using the "tftp" command.
If there are no files in the TFTP server, or directories are specified, an error may occur. (it depends on the functionality
of the TFTP server)
If timeout setting of the TFTP server is too short, an error may occur. (it depends on the functionality of the TFTP
server)
Example
Copy the content of running-config to the file name "run_conf."
Then, upload the copied "run_conf" file with the file name "run_conf_20050822" in the TFTP server called "host1."
xg# show running-config > run_conf
xg# tftp put host1 run_conf run_conf_20050822
Copy the content of running-config directly to a file in the TFTP server "host1."
xg# show running-config | tftp host1 run_conf run_conf_20050822
5.5.4 show startup-config
Function
Displays the configuration information (startup-config) stored in the nonvolatile memory of the XG1200.
Prompt
xg#
Command syntax
show startup-config
Command type
Operation management commands
Example
Display the content of startup-config.
xg# show startup-config