XG1200 User's Guide
140/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
5.10.9 vlan-statistics collection
Function
Sets the VLANs to collect their statistics information. Up to 32 VLANs can be set.
Use the no form to cancel collecting the VLAN statistics information.
Prompt
xg(config)#
Command syntax
vlan-statistics collection <1-4094> [ <1-4094> ]
no vlan-statistics
Parameter
collection <1-4094> <1-4094>
Specifies an ID of the VLAN to collect its statistics information.
To collect the statistics information about multiple VLANs, specify multiple VIDs by separating them from each other by
a space. Up to 32 VLANs can be specified.
Command type
Configuration command
Default
None
Message
% Can't set vlan id. Over max entry number. [%1$]
Explanation
No more VLAN statistics information can be collected as the number of VLANs has reached the limit for
information collection.
[[Inserted string]]%1$: Limit value
Solution
Delete VLANs whose information you need not to collect, and reissue the command.
Note
If a VID of uncreated VLAN is specified, the command is terminated normally. However, the statistics information of
uncreated VLAN is not collected.
Example
Specify VIDs 1, 10, 20, 30 and 40 to collect their VLAN statistics information.
Then, change the VIDs to 1, 10, 20 and 30 only to collect their VLAN statistics information.
xg(config)# vlan-statistics collection 1 10 20 30 40
xg(config)# vlan-statistics collection 1 10 20 30