1
Installation Instructions
P/N: TONE-WSx | WARM-WSx
DIMMER
E507432
R
Item Identification
Overview of System Wiring
Tools Needed
Important Notes
Please Read Before Installation!
Wall Switch
Cover Plate
Mounting
Screws
Wire
Connectors
x 5
x 2
Wire Stripper
Voltmeter
Screwdriver
Neutral
120 V~
50/60 Hz
Whit
e
Gr
een
Ground
-
-
+
LED Driver
Wall Switch
UP to 7
Drivers
Line/Hot
Black
Red
Green
Ground
- -
+
Bla
ck
Whit
e
Gr
een
Wa
rm
Whit
e
C
ool
Whit
e
RF
1
2
4
3
Automatic RF Pairing using an electrical signal (CCT/Dimming)
Max distance between Wall Switch and Driver 30m/100 ft
1
One wall switch can control up to 7 LED drivers
2
3
4
12/24VDC three wire output
The Driver is compatible with any CV Tunable White/Dim-to-Warm LEDs
• Neutral Wire required. If you don’t have Neutral wire in
the wallbox, please consult an electrician.
• The system is to be installed in accordance with the
National Electrical Code or local code.
• The system is to be installed and serviced by a qualified,
licensed electrician.
• Wall switch must be grounded in accordance
with the NEC or local codes.
Wall Bracket
Bracket Lock Screw
LED Driver
LED Driver
