Fujitsu PrintPartner, Руководство пользователя

Страница: 150 / 179

User’s Manual 5-23
SOLVING
PROBLEMS
Warning
Messages
Message Meaning
READY Toner runs short but printing is allowed.
TONER LOW
n (Toner low occurs when toner low mode
in the Config. menu is set to CONTINUE
or the
CONT.
button is pressed when the
printer is stopped because of a TONER
LOW n message.)
RESET
The printer displays this message when you
press
RESET
for five or more seconds. This
reset clears error latches, buffered data, and
temporary soft fonts.
SELF TEST The printer displays this message when you
press
SELF TEST
for five or more seconds
then press
ENTER
. The printer is printing
the status report.
WARMING UP The printer is warming up to its operating
temperature.
This printer counts the number of the printed sheets to estimate the
service-life of the consumables (developer unit and drum unit). The
printer indicates the following warning message when and after the
count reaches a predetermined value.
READY
REPLACE PARTS
When the warning message is indicated, press the
READY
button to
put the printer offline and press the
MENU
button to enter menu
mode. The Clear Warning message appears, indicating the expired
unit by an asterisk. When the drum unit is expired, the message is:
<CLEAR WARNING>
DRUM UNIT*
However, depending on the print quality, you may not have to
replace the developer unit or drum unit because you may be satisfied
with the print quality.
Warning Messages