Fujitsu PrintPartner, Руководство пользователя

Страница: 86 / 179

User’s Manual 2-39
PRINTING AND
PAPER HANDLING
Handling Paper
• To remove curls from printed transparency materials, use correct
frames or put a weight on them until they lay flat.
• Be sure to fan the transparency stack to prevent sheets from
sticking together.
Envelopes
This printer prints well on envelopes if you carefully follow these
guidelines:
• Use envelopes made of paper in 105 g/m
2 (28 pound) or less
weight. Printing with envelopes made of paper thinner than this
weight may produce wrinkles thus causing decrease in print quality.
• Be sure to set up the rear stacker so that envelopes are ejected
straight out the back to minimize curl.
The capacity of the rear stacker is about 20 sheets.
• Use the envelope sizes shown in the preceding table.
• To avoid damage to the printer, never use envelopes with clasps,
snaps, windows, or synthetic materials.
• Feed from the multi-function feeder (MFF) of the printer.
• Feed the envelopes with the gummed side of the flaps facing
downward.
• Do not use “encapsulated” adhesives, which seal by pressure alone.
• To avoid jamming, restrict the minimum paper weight to 64 g/m
2
(17 pound).
• To avoid creasing along the edges, use high-quality envelopes with
stiff edges.
• To avoid uneven printing, do not attempt to print on the gummed
overlap areas.
• Be sure to feed or load the envelopes with the envelope centered
against the MFF, using the paper guides.
• Before attempting large-scale printing on envelopes, consult with
your stationery dealer. Also, test the envelopes carefully for
consistent, trouble-free printing.
• If fusing is insufficient (toner is easily scraped off by fingers), use
the thick paper mode.