Fujitsu PrintPartner, Руководство пользователя

Страница: 28 / 179

User’s Manual 1-11
GETTING
STARTED
Setting Up
Loading Paper and Installing the Paper Tray
This printer has a single paper tray that is preset for letter size (8.5 x
11.0 inches) paper for U.S. customers and to A4 size (210 x 297
mm) paper for European customers. (You can adjust the paper tray
to a different size paper. See Chapter 2. You can purchase an
optional paper tray. See Chapter 3 and Appendix B.) You should
load about 50 sheets of copier paper to test the printer.
1. Pull the paper tray out of
the printer.
2. Prepare the paper tray.
Remove restraint card board
(1) and tapes securing the
rear paper guide.
3. Widen the side guides.
While holding right side-
guide together with its lock
plate, push both guides
outwards.
4. Prepare a paper stack.
Prepare paper of the size
indicated by the paper size
dial (actually the paper size
scale where the rear guide of
the paper tray is set). Fan
the paper stack both ways to
prevent sheets from sticking
together.
(1)