Fujitsu PrintPartner, Руководство пользователя

Страница: 70 / 179

User’s Manual 2-23
PRINTING AND
PAPER HANDLING
*1 Default is Letter or A4. For example, Letter for U.S. customers
and A4 for European customers. To print on legal-size paper at
600 dpi in FPS emulation, the total RAM capacity must be 12M
bytes or more.
*2 This is for Letter and portrait. It automatically changes
depending on paper size and page orientation.
*3 Valid when a duplex unit is installed (12MX only)
*4 Makes the contours of objects appear smoother than normally
possible with the printers standard resolution. Actual resolution
depends on emulations and resolutions selected in menu mode.
*5 Actual resolution depends on emulations selected in menu mode.
*6 Displayed when the thickness control is normal (factory default).
*7 Displayed when the thickness control is extension. Tray2 media
is displayed when tray 2 is installed.
*8 Displayed when soft fonts are downloaded or a font SIMM card
is installed
*9 Displayed when the selected font is a scalable and fixed-spacing
one. The default depends on a selected font.
*10 Displayed when the selected font is a scalable and proportional-
spacing one. The default depends on a selected font.
*11 Effective when PCL jobs are being executed. These values are
used as defaults of top and left offset specifications in PCL mode.
Menu Functions
Submenu (bold)/Item
Parallel menu
Acknowledge (*15)
Bi-direction
NPAP mode
Serial menu (*16)
Baud rate
Pacing
DTR polarity
ROBUST XON
Network menu (*17)
NPAP mode
Bootp
IP address
IP netmask
IP gateway
Clear warning
<Clear warning>
Options
Mode1, Mode2, Mode3
On, Off, ECP
Auto, On, Off
2400, 4800, 9600, 19200, 38400, 57600
DTR, Xon/Xoff
Hi, Low
On, Off
Auto, On
No, Yes
###. ###. ###. ### (### = 0, 1, 2, ..., 255) (*18)
###. ###. ###. ### (### = 0, 1, 2, ..., 255) (*18)
###. ###. ###. ### (### = 0, 1, 2, ..., 255) (*18)
Shows the printing component to be replaced.
Developer unit, Drum unit