Fujitsu PrintPartner, Руководство пользователя

Страница: 121 / 179

4-10 User’s Manual
Clearing a Service-life Counter
After replacing the developer unit or the drum unit, it is essential to
clear a counter which estimates the end of service life of the
developer unit or the drum unit. If the counter is not cleared, the
printer continues displaying the warning message
REPLACE PARTS
or displays the message at a bad timing.
The following steps differ depending on the message which made
you replace the developer unit or the drum unit.
• When you have replaced the developer unit because of a
toner low
message, the printer gives you instructions to clear the counter by
the message display.
• When you have replaced the developer unit or the drum unit
because of a replace parts message, you must select the menu mode
and perform the clear warning operation to clear the counter.
After Replacement because of a Toner Low Message
1. When the printer’s upper
door is closed, t he printer
indicates a replacement
confirmation message.
The
message display indicates
WARMING UP then
DEV.CHANGED?
Y:ENTER N:CONT
.
2. Press the
ENTER
button. If
the old developer unit was
replaced by a new one, press
the
ENTER
button to clear
the developer unit service-
life counter.
Periodic Routine Maintenance
MFF
PAPER SIZE
PRINT
FONT
SELF
TEST
RESET
CONT.
ENTER
–
+
MENU READY
FORM
FEED
RESET
MENU
SELECT
POWER
ONLINE DATA ERROR
DEV.CHANGED?
Y:ENTER N:CONT
POWER
ONLINE DATA ERROR
WARMING UP