Fujitsu PRIMEQUEST 1000 Series, Руководство по установке

Страница: 210 / 344

FIGURE 6.20 New Outbound Rule Wizard - Protocol and Ports
26. The wizard displays the [Scope] window, as indicated at the upper left. Select or enter values for the following
items. Then, click the [Next] button.
TABLE 6.15 [Scope] setting items
Window item Selected or entered value
Which local IP addresses does this rule match? Any IP address
Which remote IP addresses does this rule match? Select [These IP addresses]. Then, click the
[Add] button.
Enter the IP address of the PSA-to-MMB
communication LAN on the MMB side.
27. The wizard displays the [Action] window, as indicated at the upper left. Select [Allow the connection]. Then,
click the [Next] button.
28. The wizard displays the [Profile] window, as indicated at the upper left. Check all the [Domain], [Private],
and [Public] check boxes. Then, click the [Next] button.
29. The wizard displays the [Name] window, as indicated at the upper left. Enter "PSAICMP" in [Name]. Then,
click the [Finish] button.
PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
182 C122-E107-09EN