Fujitsu PRIMEQUEST 1000 Series, Руководство по установке

Страница: 182 / 344

- Make settings only as needed. Operations management software needs these settings to manage events by
partition.
- Even if this setting is skipped, traps are sent via the MMB.
- The trap destination must be running both a trap receiving application and a trap manager to be able to receive
standard SNMP Service traps.
Operations
1. Edit the PSA installation folder\etc\opt\FJSVpsa\usr\psatrap.conf file.
Example of setting PSA trap notification
[PSATRAP]
PSATRAP_SET=<0 or 1>
Setting value
1: Enables PSA trap notification from the partition.
0: Disables PSA trap notification from the partition.
Example of input
[PSATRAP]
PSATRAP_SET=1
2. Restart PSA to apply the settings.
For details on how to restart PSA, see Restarting PSA .
3. Select [Control Panel] - [Administrative Tools].
4. Click [Computer Management].
5. Click [Services and Applications] - [Services] in the tree on the left.
6. Double-click [SNMP Service] in the right side of the window.
>> The [SNMP Service] dialog box appears.
7. Click the [Trap] tab.
8. Enter the specified community name in the [Community Name] field. Then, click [Add to List].
9. Click [Add] in [Trap Send Destination].
10. Enter the host name or IP address of the server receiving the trap (i.e., the trap destination). Then, click [Add].
11. Click [OK].
PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
154 C122-E107-09EN