background image

Introduction

 Glossary

Appendix

Glossary

Index

Contents

TOP

225

How to Load 
Documents

How to Use the 
Operator Panel

Various Ways to 
Scan

Daily Care

Troubleshooting

Operational 
Settings

Replacing the 
Consumables

Scanner 
Overview

Edge Extract

A function which traces the boundaries between black and white areas, and extracts them as outlines.

Eject roller

Rollers that feed documents from the ADF onto the stacker.

Emphasis

A function which decreases the density of bright colors (except for white) around black areas. Increasing the value for this 
function removes dotted image noise and also produces "softened" images.

Error diffusion

Method of halftone (pseudo-grayscale) image processing which is based on black & white pixel binarization. It sums the 
optical density of a pixel and its adjacent pixels, then relocates black pixels in the order of density to minimize the difference 
between scanned and output images. By diffusing the errors onto other pixels, the density data of adjacent pixels can be 
binarized. This function suppresses moire patterns of dotted halftone images such as newspapers, and reproduces its 
grayscale gradation.

Feed roller

A roller that feeds the document through the ADF.

Filter

A function that applies a type of filter operation process on a scanned image.
Types of filtering are as follows:

Digital Endorser:
Adds alphanumeric character strings on the scanned image data.

Page Edge Filler:
Fills in the margins of the scanned image in a specified color.

Flatbed

An input device of the scanner. Place documents one by one on the document bed (glass section) and scan each 
document. This is used to scan documents that cannot be scanned with the ADF, such as books and magazines.

Содержание FI-7600










































































































































































































































Отзывы: