Chapter 8 Operational Settings
188
2
From the listing on the left, select [Device Setting 2]
[Paper Protection Sensitivity].
3
Select a paper protection detection method which you
want to change the sensitivity level for.
Feeding Accuracy: Select this to detect a document that is unusually
warped when a feeding error occurs.
This is available when you have selected
[Feeding Accuracy] or [Feeding Accuracy &
Noise] for the paper protection detection method.
Feeding Noise: Select this to detect paper jam noise.
This is available when you have selected [Feeding
Noise] or [Feeding Accuracy & Noise] for the paper
protection detection method.
4
Specify the sensitivity level.
Low: Decreases the sensitivity level to detect warped documents or
paper jam noise.
Normal: Monitors warped documents or paper jam noise with normal
sensitivity.
Keep this setting for normal use.
High: Increases the sensitivity level to detect warped documents or
paper jam noise.
HINT
To detect paper warp or paper jam noise faster and stop the
scan, select [High].
To decrease the frequency of paper jam detection if paper jams
occur frequently in the feeder, select [Low].
This setting can also be configured with the operator panel.
When the operator panel setting is prioritized, the operator
panel setting is prioritized over the Software Operation Panel
setting.
