Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 44 / 70

System expansions
36 A26361-K679-Z120-1-7619, edition 2
Installing and removing the riser card
You can install a riser card either with or without a DVI port. These are installed and removed
differently.
Installing the riser card without a DVI port
► Open the casing (see "Opening the
casing").
► Place the riser card onto the provided slot
on the main board and press until it
engages. See technical manual for the
mainboard.
► Install the board holder again (see
"Installing the board holder").
► Close the casing (see "Closing the
casing").
i
So that the riser card is sufficiently secured in case of further system expansions, you
must reinstall the board holder after installing the riser card before you make further
changes to the riser card.
Removing the riser card without a DVI port
► Open the casing (see "Opening the
casing").
► Remove the board holder (see "Removing
the board holder").
► Pull the riser card upward out of the
casing.
► Close the casing (see "Closing the
casing").