Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 39 / 70

System expansions
A26361-K679-Z120-1-7619, edition 2 31
Closing the casing
2
a
a
1
► Position the top cover from above in
the direction of the arrow (1) on the
casing base so that the distance (a)
from the rear casing edge is
approximately 20 mm.
► Push the top cover in the direction of
the arrow (2) until it engages.
a
► Lock the casing by sliding the locking slider (a) in the direction of the arrow until it engages.
► Lock the casing again if necessary.
► Return the system unit to its original position.
► Reconnect the cables that you disconnected before.
Installing and removing a board
!
Please take note of the section "Information about boards".
If you want to install a board, you have to follow the steps below.
– Removing the board holder
– Installing a board
– Installing the board holder
You will learn more about the individual steps in the following sections.