Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 55 / 70

System expansions
A26361-K679-Z120-1-7619, edition 2 47
Installing the hard disk
► Open the casing (see "Opening the casing").
► Make the required settings (e.g. master setting) on the drive.
► Attach the EasyChange rails to the hard
disk.
i
If no hard disk was installed in your system yet, then the EasyChange rails are attached to
a bracket. Pull this bracket out of the bay like a drive.
► Slide the hard disk together with the EasyChange rails into the bay until the hard disk engages
noticeably.
► Attach the connectors of the data and power cables at the hard disk drive.
► If necessary also insert the data cable to the main board. See technical manual for the
mainboard.
► Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup .