Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 50 / 70

System expansions
42 A26361-K679-Z120-1-7619, edition 2
Installing and removing an accessible 5 1/4-inch drive
► Open the casing (see "Opening the casing").
Removing an accessible 5 1/4-inch drive
1
1
2
► Remove the two screws (1) and pull the
drive slightly forward (2).
► Remove the connector of the data and
power cables from the drive.
► Remove the drive the direction of the arrow
(2) out of the bay.
► If you do not want to install a new drive, you must refit the plastic drive cover again (see
"Installing plastic drive cover").
► Close the casing (see "Closing the casing").
Installing an accessible 5 1/4-inch drive
► Make the required settings on the new drive.
► If necessary, install the corresponding plastic drive cover (see "Installing plastic drive cover").
2
1
2
► Slide the new drive somewhat into its bay of
the drive cage.
► Attach the connector of the data and power
cables at the drive.
► Attach the data cable to the mainboard (see
technical manual of mainboard).
► Push the drive fully into the bay (1) and
secure it with the two screws (2).
► Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup .