Fujitsu Siemens Computers FUTRO C Скачать руководство пользователя страница 52

Страница: 52 / 70

System expansions

A26361-K679-Z120-1-7619, edition 2

►

Plug the power supply connector (a) and
the data connector (b) into the module bay
drive contact connector.

►

Insert the drive contact connector of the
module bay into the drive cage and fix it
with the two screws (1).

►

Insert the drive rail of the module bay into
the drive cage and fix it with the two
screws (2).

►

Close the casing (see "Closing the casing").

You can now install a module.

It may be necessary to modify the entry for the drive in the

BIOS Setup

Locking or opening module eject lever

You can lock the eject lever on the module slot to prevent unauthorised removal of the drive module
from the module slot. This lock is located behind the eject lever.

►

Open the casing (see "Opening the casing").

Locking eject lever for modules

Opening eject lever for modules

►

Fold the lock into the notch on the eject
lever.

►

Fold the lock upward out of the notch on
the eject lever.

►

Close the casing (see "Closing the casing").

Содержание FUTRO C







































































Результаты поиска

Содержание FUTRO C

Отзывы:

Похожие инструкции для FUTRO C

Бренды по названию

Популярные бренды

Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Результаты поиска

Содержание FUTRO C

Отзывы:

Похожие инструкции для FUTRO C

Бренды по названию

Популярные бренды