Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 59 / 70

System expansions
A26361-K679-Z120-1-7619, edition 2 51
► Disconnect the SmartCard cable connector from the main board. See technical manual for the
mainboard.
► Loosen the screws (1).
► Pull the SmartCard reader out of the bay.
► Fold down the drive cage (see "Closing the drive cage").
► Close the casing (see "Closing the casing").
Installing and removing a WLAN module (optional)
You can also install a WLAN module for wireless LAN (Local Area Network) in the bay of the hinged
open drive cage.
Installing WLAN module
► Open the casing (see "Opening the casing").
2
1 1
► Fold up the drive cage (see "Opening the drive cage").
► Slide the WLAN module carefully into the bay provided for it and secure it with the two
screws (1).
i
Make sure that you do not scratch the antenna on the front opening of the drive cage.
► Connect the USB cable (2) to the WLAN module.
► Connect the USB cable of the WLAN module onto the appropriate connector on the main
board. See technical manual for the mainboard.
► Fold down the drive cage (see "Closing the drive cage").
► Close the casing (see "Closing the casing").
i
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"
manual. This manual is provided as PDF file on the "User Documentation" or
"Drivers & Utilities" CD.