Fujitsu Siemens Computers FUTRO C, Руководство по эксплуатации

Страница: 19 / 70

Preparing for use
A26361-K679-Z120-1-7619, edition 2 11
Connecting a keyboard
Depending on the equipment level selected, your device will be supplied with a standard keyboard or
a USB keyboard.
Connecting standard keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside or on the rear of the keyboard.
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Connecting USB keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the socket on the underside or on the
rear of the keyboard.
► Insert the flat rectangular USB plug of the keyboard cable into a USB port of the device.
Connecting the device to the mains voltage
1
2
► Connect the power cable to the device (1).
► Plug the power plug into a grounded mains outlet (2).
i
The device is fitted with a wide voltage range power supply. This means that manual
voltage setting is not necessary for this device. Therefore there is no switch available for
the voltage setting.