FujiFilm Frontier DE100 Скачать руководство пользователя страница 109

Страница: 109 / 188

- Frontier DE100 Operation Guide -

5-21

Replacing the Maintenance Cartridge

Replacing Consumables

5.3 Replacing the Maintenance Cartridge

The maintenance cartridge absorbs ink consumed during head cleaning. This section explains

how to replace used maintenance cartridges.

5.3.1 Checking the Free Space in the Maintenance Cartridge

The free space in the maintenance cartridge can be checked in the Notification Message.

Displays the Notification Message.

“2.4.1 Notification Message Display Method” (Page 2-15)

Check the remaining capacity in the maintenance cartridge.

When it is time to replace the maintenance cartridge, the printer’s Maintenance Cartridge

light turns on.

Also, an error message is displayed on the computer’s screen.

Icon

Explanation

There is sufficient

free capacity.

The remaining
free capacity is
less than 10%.

There is no free
capacity (less than
1%).

Unknown because
the printer is

offline.

Click the OK button.

The Notification Message is closed.

Содержание Frontier DE100





























































































































































































Результаты поиска

Содержание Frontier DE100

Отзывы:

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 109 / 188

Результаты поиска

Содержание Frontier DE100

Отзывы: