manualshive.com logo in svg

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 150 / 188

Поделиться
Скачать
FujiFilm Frontier DE100 Скачать руководство пользователя страница 150

7-4

- Frontier DE100 Operation Guide -

When an Error Occurs

7.1.2  Errors and Solutions

Check the details of the error displayed, and then take the necessary measures.

7.1.2.1  Information Error

Error ID

Message

I-014F

Printer is used in low temperature environment.
If you continue using the printer, print quality may not be maintained.

I-0150

Printer is used in high temperature environment.
If you continue using the printer, print quality may not be maintained.

I-0204

It is nearly time to replace the carriage assembly.
Contact service support.

I-0301

Scrap paper box is full.
Empty scrap paper box.

I-0302

Scrap paper box has come off.
Install the scrap paper box correctly.

I-0303

Check the scrap paper box.
If scrap paper box is full with paper scraps, empty the box.

I-030C

Pause button has been pressed.
Printing will be paused after completing prints which have already started print preparation.

I-030F

It is nearly time to replace the waste ink bottle.
Contact service support.

I-0311

It is nearly time to replace the waste ink tank.
Contact service support.

I-0313

It is nearly time to replace the flushing box.

Contact service support.

I-0315

It is nearly time to replace the waste ink gutter.
Contact service support.

I-0317

The printer is near End of Service Life.
Contact service support.

I-1101

Ink (K) is low.

Prepare a new ink cartridge.

I-1102

Ink (C) is low.
Prepare a new ink cartridge.

I-1103

Ink (M) is low.
Prepare a new ink cartridge.

I-1104

Ink (Y) is low.
Prepare a new ink cartridge.

I-1306

Maintenance cartridge is almost full.
Be sure to have a new maintenance cartridge ready.

I-1307

Head maintenance has failed.

Clear any errors first and try the printer maintenance again.

I-1343

Automatic head maintenance in progress.
Wait until automatic head maintenance is complete.

I-2107

Failed to acquire printer information.
Printing is available but to check the serial No., restart the printer.

I-2108

Failed to accept print instruction.
If the maintenance tool has been launched, submit the print instruction again after closing the tool.

I-2109

Failed to accept print instruction.
Check the connection of the printer power cable or USB cable. 

Содержание Frontier DE100





























































































































































































Отзывы:

Нет отзывов