FujiFilm Frontier DE100 Скачать руководство пользователя страница 10

Страница: 10 / 188

- Frontier DE100 Operation Guide -

Notes on Usage

Notes on Usage

Notes when Handling the Main Unit

• Do not suddenly change the temperature in the room where this printer is installed.

If the temperature changes suddenly, drops of water (condensation) could occur inside

the printer which may have an adverse effect on operations.

• Use the printer in an environment with a temperature of 10 to 30 °C, and a humidity of 20

to 80 %. When the printer is placed on a system rack, make sure the environment of the

rack is within these ranges.

• Do not place any containers containing water, such as vases or cups, on the printer. If

water enters the printer, it may breakdown. Also, do not put any heavy objects on the

printer.

• The printer is equipped with several vents. The vents take in and exhaust air to cool the

printer internally. Do not block these vents by placing any objects against them, or by

covering them with film sheets or paper.

• Do not use accessories designed for this printer with any other products.

• If the printer’s covers are opened during printing, a safety device is activated and

printing is stopped automatically. Do not turn off the printer in this condition. This could

cause the print head nozzles to dry and print quality to decline.

• Depending on the performance of the computer being used, the printer stops printing

temporarily; however, this is not a malfunction. This problem does not normally occur

for Windows 7 or later.

The printer and the computer are communicating. Do not do anything to interfere with

the printing operation, such as opening covers or removing the paper.

• If the printer is not used for an extended period of time, make sure you leave the Ink

cartridges and Maintenance Cartridge installed.

• Do not leave the printer for more than three days in a state in which the power was

turned off due to a power outage and so on. Paper may curl which could cause a decline

in printer performance.

• Contact our service support when transporting the printer.

Notes on the Paper

Notes on Handling

Use paper recommended by our company.

Note the following points when handling the paper.

• Do not bend the paper or scratch the surface of the printable side.

• Do not touch the printable side of the paper. Moisture and oil from hands can have an

adverse effect on the print quality.

• Handle the paper by the edges. We recommend wearing cotton gloves.

• Do not throw away the paper packaging as you can use it for storing the paper.

• Do not use paper that is wrinkled, scuffed, torn, or dirty.

Notes on Storage

Before and after opening the paper, store it in an environment that is not subject to direct

sunlight and meets the following conditions. If paper is not being used after it has been

opened, remove it from the spindle unit and wind it up before storing.

Содержание Frontier DE100





























































































































































































Результаты поиска

Содержание Frontier DE100

Отзывы:

FujiFilm Frontier DE100, Руководство по эксплуатации, Страница: 10 / 188

Результаты поиска

Содержание Frontier DE100

Отзывы: